Machine Specifications : HT

 Spec 2

　

	ITEMS		UNIT	HT-150			HT-200			HT-250			HT-300
Injection Unit	Screw Type			A	B	C	A	B	C	A	B	C	A	B	C
	Screw Diameter		mm	40	44	50	44	50	54	50	54	62	54	62	68
	Screw Stroke		mm	200			225			240			280
	Theoretical shot volume		cm³	251	304	393	342	442	515	471	549	724	641	845	1016
	Shot weight of injection (ps)		gram	231	279	361	314	406	473	433	505	665	589	776	934
	Injection pressure	I	kgf/cm²	1785	1475	1142	1833	1420	1217	1971	1690	1282	2000	1517	1261
	Injection speed		mm/sec	117			117			111			113
	Injection rate		cm³/sec	147	178	230	177	229	267	217	253	334	258	340	409
	Injection pressure	II	kgf/cm²	2205	1822	1411	2224	1722	1476	2500	2144	1626	2497	1894	1574
	Injection speed		mm/sec	95			96			87			90
	Injection rate		cm³/sec	119	144	187	146	189	220	171	200	263	206	272	327
Mould Clamping Unit	Mould clamping force		tonf	150			200			250			300
	Mould clamping stroke		mm	460			510			550			600
	Mould thickness		mm	130~550			150~610			160~670			180~730
	Suggested minimum mold dim. (H x V)		mm	299x299			332x332			364x364			397x397
	Distance between tie bars (H x V)		mm	460x460			505x505			555x555			605x605
	Mould platen (H x V)		mm	670x670			745x745			820x820			894x894
	Ejector stroke		mm	110			130			150			185
Electrical equipment	Max. Pump driving motor		KW	25(18.65)			30(22.38)			40(29.84)			50(37.30)
	Temperature controller		(range)set	(0-400°C)x4			(0-400°C)x5			(0-400°C)x5			(0-400°C)x5
	Heater capacity		kw	11.41			14.2			16.53			19.75
Others	Machine dimensions (L x W x H)		mm	5050x1380x1730			5910x1480x1830			6520x1550x1930			6960x1660x2000
	Oil tank capacity		liter	270			340			460			560
	Machine weight		metric tons	5.5			7.5			11			12
	Max. system pressure		kgf/cm²	140			140			140			140

* The shot weight is based on polystyene at specific gravity of 1.05 

* Due to continuous improvements, we reserve the right to amend any of the above specifications  without prior notice.

Back to Content